manualshive.com logo in svg

Siemens SIMATIC FM 353, Manual

Share
Download
Siemens SIMATIC FM 353 Manual Download Page 77

Defining Parameters

5-25

FM 353 Stepper Drive Positioning Module

6ES7 353-1AH01-8BG0

5.4

Parameterization with “Parameterize FM 353”

Entering the values

You have a variety of options for entering your parameterization data.

1. User data

You can input values or select texts in a table. Select input fields with the cursor

and enter the values. You can select the associated texts for the values with the

space key.

2. Machine data

The values are entered in dialog boxes and windows selected by option tabs.
To display the machine data in a table, select the menu 

View > Table form

.

Here you can enter the values as described in the user data section.

3. Tool compensation data and increment sizes

You can input the values in a table. Select input fields with the cursor and enter

the values.

4. Traversing programs

Traversing programs are input in text format.

A comment column is included in the tables for MD, SM, and TO values. This com-
ment is not stored in the data block. It can be printed out or stored with the data in
the file on export.

Summary of Contents for SIMATIC FM 353










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands