manualshive.com logo in svg

Siemens SIMATIC FM 353, Manual

Share
Download
Siemens SIMATIC FM 353 Manual Download Page 62

Defining Parameters

5-10

FM 353 Stepper Drive Positioning Module

6ES7 353-1AH01-8BG0

Entering values

In “Parameterize FM 353” select the menu 

File > New > Machine Data 

to call up

the following display.

Fig. 5-4

Entering values for machine data

Enter the machine data in the tab windows.

You can also enter your values in a table by selecting 

View > Table form

.

When creating the MD DBs you must follow the instructions in Chapter 7 
“Starting up the FM 353”.

Note

The measurement system (MD7) must match the measurement system specified

in the other DBs.
The measurement system raster (MSR) is the smallest distance unit in the active

system of measurement.
If at some point you have failed to take this precaution:
1. Delete all data blocks (which do not match the measurement system) or clear

the memory of the FM 353 completely.

2. Modify the other data blocks on the PG.
3. Reload the data blocks to the FM 353.

Summary of Contents for SIMATIC FM 353










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands