manualshive.com logo in svg

Siemens SIMATIC FM 353, Manual

Share
Download
Siemens SIMATIC FM 353 Manual Download Page 151

Starting up

7-3

FM 353 Stepper Drive Positioning Module

6ES7 353-1AH01-8BG0

7.2

Initial values for testing and optimization

Parameterization information

You can find information about parameterization:

S

In Chapter 5 of this manual

S

In the on-line help in “Parameterize FM 353”

Overview

The following overview display appears in the “Parameterize FM 353” tool:

Fig. 7-1

Overview display for parameterization and start-up

You can return to this display at any point during parameterization by selecting the
menu 

View > Overview

.

As it is written to the FM 353, the DB-MD is checked for the input limits of the indi-
vidual values and their interdependencies. It is then stored only if all values are
allowed. Otherwise data error messages are displayed by way of the MPI. A defec-
tive DB will not be retained when the power is turned off.

Summary of Contents for SIMATIC FM 353










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands