manualshive.com logo in svg

Siemens SIMATIC FM 353, Manual

Share
Download
Siemens SIMATIC FM 353 Manual Download Page 58

Defining Parameters

5-6

FM 353 Stepper Drive Positioning Module

6ES7 353-1AH01-8BG0

You can use the mouse to change the size of the window for entering the parame-
ter data and the size of the overview display.

Proceed as follows:

1. Position the mouse pointer on the top border of the window, so that it changes

into an arrow.

2. Press the left mouse button, and drag the pointer downwards by moving the

mouse.

3. Release the mouse button.
4. Position the mouse pointer on the bar with the name of the window.
5. Press the left mouse button, and drag the pointer upwards by moving the

mouse. When you have moved the window to the correct position, release the

mouse button.

When you have configured your project, you can call up the 

Properties

 screen in

S7 Configuration by selecting the module and activating the menu command 

Edit

>

 

Object Properties

.

Note

Once you have imported a project from STEP 7 V2.1, you cannot store any pa-

rameter data (data blocks) in this project. You can only read the parameter data in

this project by importing the data from a file, or store the data by exporting the

data to a file.

Suggestion!

1. Create a new project in STEP 7 V3.1.
2. Copy all programs (*.awl) into the new project.

Integrated help

The parameterization user interface

 

has an integrated help system to support you

when you set the parameters of the positioning module. To call up the integrated
help:

S

Select the menu command 

Help > Help Topics...

 or

S

press the 

F1

 key or

S

select the symbol 

 and then move to the element or window you want infor-

mation about and press the left mouse button.

Summary of Contents for SIMATIC FM 353










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands