HiPath 5000 Startup and Administration
P31003-H3560-S403-54-7620, 09/05
6-50
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
start_h5.fm
Perform HiPath 5000 Basic Configuration
6.10.1
Configuring HiPath 5000 with HiPath ComScendo Service
The customer database must be loaded to enable the individual IP workpoint clients, trunks,
etc. to be configured.
Procedure
1.
StartHiPath 3000 Manager E.
2.
Open the
Transfer
dialog using the
File
menu.
3.
In the Communication Settings tab select
IP-HiPath
as the access and enter the
IP ad-
dress
of the HiPath 5000 with HiPath ComScendo Service in the appropriate field.
Select
Read/Write CDB
and load the customer database by clicking the
System -> PC
button.
4.
Perform the customer-specific system programming.
Refer to the HiPath 3000 Manager E Help for information on programming individual fea-
tures.
5.
Save the customer database.
6.
Then switch to the
Transfer
dialog.
7.
In the Communication Settings tab select
IP-HiPath
as the access and enter the
IP ad-
dress
of the HiPath 5000 with HiPath ComScendo Service in the appropriate field.
Select
Read/Write Database
. Set the
Overwrite
and
Hardware
flags and transfer the cus-
tomer database by clicking the
PC –> System
button.
Once transfer is complete, HiPath 5000 automatically performs a reset and then returns to
operation.
>
During the first login, the system requests the identity of the user and asks for a
new password (for more information see Section 12.6.1.1, “Logon With User
Name and Password”).
>
The HG 1500 resources (see Page 10-38) are to be administered with Web-based
Management (WBM). Information about the procedure can be found in the Web-
based Management WBM Help.