Service
P31003-H3560-S403-54-7620, 09/05
12-84
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
service.fm
Security Features
12.6.1.3
System Access Options
The user’s access rights, meaning the data that the user may read or manage, always depend
on the user group to which the user is assigned.
Service tools
●
Assistant T and Assistant TC systems
Log on by entering your user name and password (regardless of code lock)
The system can only be accessed using the first two U
P0/E
connections from the first
SLMO/SLU board in the system.
●
HiPath 3000 Manager E and HiPath 3000 Manager C (local)
Log on by entering your user name and password
●
HiPath 3000 Manager E (remote), direct connection
Log on by entering your user name and password
The system can be accessed directly using the integrated digital modem (B channel) or the
integrated analog modem. However, the user is required to establish a 5 digit access code
beforehand.
●
HiPath 3000 Manager E (remote), callback connection
Log on by entering your user name and password
The system can be accessed using the integrated digital modem (B channel) or the inte-
grated analog modem. However, you have to set up a callback index beforehand.
●
HiPath Software Manager
Log on by entering your user name and password
AMHOST
The AMHOST (Administration and Maintenance via HOST) feature allows Plus products to
read certain system information and to change it, if necessary. To enable Plus products to ac-
cess the system, you have to set up a user without a user group in the HiPath 3000 default user
administration. Enter “AMHOST” as the user name and “77777” as the default user password.
You can only change this password if the system is configured using a variable password. In
this case, delete the “AMHOST” user and re-configure the system with the same user name
and a new password.