Siemens HiPath 1100 Programming Manual Download Page 191

Page: 191 / 241

Call Report

191

Step by step

S2M Maintenance

You can use the administration program to:

• download software

• remove traces

• select the software’s type of connection to the mod-

ule (local or via modem)

• select a COM port

For further details on how to configure a TME1 module

refer to the program’s “Help” system.

Call Report

CallReport is a billing system that allows you to record

information about calls originated or received by your

PABX system.

CallReport runs on a regular PC under a Windows 95 /

98 /NT 4.0 / 2000 / XP environment. It receives data

sent by the PABX that are then processed and stored in

a PC hard disk and identified by extension, time, call du-

ration, trunk, outgoing route and call cost. Based on this

data the software can generate reports including total

costs per extension, sector, group, in addition to traffic

reports for both outgoing and incoming calls.

All the information is specified in the CallReport data-

base and can be manipulated by the user logged in as

Administrator.

The availability of administrative softwares Hi-

Path 1100 Manager, HiPath 1100 ADSL Manager,

S2M software and E1 Trunk Manager for our cli-

ents is subject to undergoing a technical course

for prospective users.

If the TME1 module is connected to the S2M

Manager Tool but is configured with the CAS

software, the technician will be warned via a

popup message that the software installed is not

compatible with the S2M Manager. The mes-

sage will suggest that the user download the ap-

propriate software (Menu Download->Software).

The user may then choose whether or not to

download the S2 software. The same thing hap-

pens if the module is connected to the E1 Trunk

Manager Tool but is configured with the S2 soft-

ware.

Summary of Contents for HiPath 1100


















































































































































































































































Search results

Summary of Contents for HiPath 1100

Reviews:

Related manuals for HiPath 1100

Brands by name

Popular brands

Siemens HiPath 1100, Programming Manual

Search results

Summary of Contents for HiPath 1100

Reviews:

Related manuals for HiPath 1100

Brands by name

Popular brands