Siemens HiPath 1100 Programming Manual Download Page 71

Page: 71 / 241

Programming an extension

Step by step

= DTMF prior to ringing

= DTMF during ringing

= FSK before ringing (Default for Korea)

= FSK during ringing

= FSK prior to ringing or during a conversation

(default for France)

= FSK during ringing or a conversation

Enter the next analog extension number.

Press this key.

Initial status for programming mode.

Hide group prefix

This settings allows an extension to receive an external

call over an external line belonging to a group of external

lines, and to hide the group number so it does not show

on the display. When a special access call is received

and transferred to an extension with this feature is acti-

vated, the external line number does not show on the

display.

Example: An analog extension receives an external call

over an external line that belongs to group 890 - number

24987049. When this feature is activated, the display

show only 24987049. When this feature is deactivated,

the display shows 89024987049, that is, the number for

the group of external lines followed by the external

number.

Required:

Programming mode must be activated (*95

31994).

ell

Enter the programming code.

Enter the analog extension number (e.g., 12/102).

To activate/deactivate external CFW:

= Activated

= Deactivated (default)

If the country set (code 165

page 20) is France,

the CLIP FSK feature will be available for the Hi-

Path 1120 only.

Summary of Contents for HiPath 1100


















































































































































































































































Search results

Summary of Contents for HiPath 1100

Reviews:

Related manuals for HiPath 1100

Brands by name

Popular brands

Siemens HiPath 1100, Programming Manual

Search results

Summary of Contents for HiPath 1100

Reviews:

Related manuals for HiPath 1100

Brands by name

Popular brands