Siemens HiPath 1100 Programming Manual Download Page 48

Page: 48 / 241

Step by step

External line settings

Type of answering signal

When a carrier provides this facility, the ticketing pro-

cess occurs in real time. That is, when the called party

answers/hangs up, the public exchange sends a signal

to the system to initiate/end call detail report.

Required:

Programming mode must be activated (*95

31994).

eil

Enter the programming code.

Enter a number for an analog trunk (e.g., 801).

d . f

Enter the appropriate number for signaling type:

= None (default)

= Polarity reversal

= DTMF tone

Enter the next number for the analog trunk.

Press this key.

Initial status for programming mode.

When DTMF is selected, you must program a

tone (A, B, C or D) using Manager. If a tone is not

programmed using the Manager, the switch de-

faults to tone A.

When using the GROUND option for Canada,

this feature must be deactivated for external

lines.

If this feature is activated, outgoing external calls

cannot involve consultation or transfer before the

destination user picks up.

Summary of Contents for HiPath 1100


















































































































































































































































Search results

Summary of Contents for HiPath 1100

Reviews:

Related manuals for HiPath 1100

Brands by name

Popular brands

Siemens HiPath 1100, Programming Manual

Search results

Summary of Contents for HiPath 1100

Reviews:

Related manuals for HiPath 1100

Brands by name

Popular brands