Siemens HiPath 1100 Programming Manual Download Page 88

Page: 88 / 241

Step by step

Programming an extension

This defines a time limit for making external calls on

each extension. In other words, when the total time of

the external calls made reaches the time limit set for

calls underway, these calls will be interrupted and no

further calls may be made until more time "credit" is

awarded.

Activate/Disable timeout for external calls

Required:

Programming mode must be activated (*95

31994).

fgm

Enter the programming code.

Enter the extension number (e.g. 11/101).

Activate/Disable the timeout for external calls:

= Activated

= Deactivated (default)

Initial status for programming mode.

Calls may also be interrupted if the extension has

been configured with these features:

•

”Timer for outgoing external calls”

page 87, the timeout stops counting.

•

”Billing”

page 105

, the call will only be

started or can continue if the time and credit
limit have not been reached.

For simultaneous calls, call times will be counted

separately.

If the call ends before a cycle is complete, the

time will be counted as if the call had completed

a 5-second cycle.

The

”Call deflection”

page 154 is not sup-

ported by this feature.

Summary of Contents for HiPath 1100


















































































































































































































































Search results

Summary of Contents for HiPath 1100

Reviews:

Related manuals for HiPath 1100

Brands by name

Popular brands

Siemens HiPath 1100, Programming Manual

Search results

Summary of Contents for HiPath 1100

Reviews:

Related manuals for HiPath 1100

Brands by name

Popular brands