Siemens HiPath 1100 Programming Manual Download Page 84

Page: 84 / 241

Step by step

Programming an extension

Enter an MSN (up to 20 digits).

Press this key.

Initial status for programming mode.

Collect call barring by extension

When this blocking is activated, the system automati-

cally rejects all incoming collect calls over a digiital line;

calls received over an analog line are rejected only at the

moment they are answered.

Required:

Programming mode must be activated (*95

31994).

emg

Enter the programming code.

Enter the extension number (e.g. 11/101).

Activate/Disable collect call barring:

= Activate

= Disable (default)

Enter the next extension number.

Press this key.

Initial status for programming mode.

If a call has been answered at least once by the

system, collect call barring cancels the blocking.

If an incoming call over a digital line is forwarded

because there was no answered (*14), and col-

lect call barring is activated, the call will ring at

the first attendant for the external line.

Please ask your local carrier about enabling

blocking on digital lines.

Summary of Contents for HiPath 1100


















































































































































































































































Search results

Summary of Contents for HiPath 1100

Reviews:

Related manuals for HiPath 1100

Brands by name

Popular brands

Siemens HiPath 1100, Programming Manual

Search results

Summary of Contents for HiPath 1100

Reviews:

Related manuals for HiPath 1100

Brands by name

Popular brands