Siemens HiPath 1100 Programming Manual Download Page 104

Page: 104 / 241

Step by step

General settings

104

Automatic update of date/time

This setting allows automatic synchronization of the

system’s date and time through the local carrier, during

an external call.

Required:

Programming mode must be activated (*95

31994).

dgl

Enter the programming code.

Activate/Disable synchronization:

= Activated (default)

= Deactivated

Initial status for programming mode.

Callback for external calls via ISDN

By configuring this setting, an external ISDN call can

schedule a Callback for the MSN number called.

Required:

Programming mode must be activated (*95

31994).

ffe

Enter the programming code.

Activate/deactivate callback:

= Activate callback (default)

= Disable callback

Initial status for programming mode.

When you restore the default setting (99), the

date the SW was generated will be displayed.

The time displayed will be 12:00.

The settings that are automatically updated are:

month, day, time and minute. Year is not includ-

ed in the FSK message settings - it is defined as

the software’s manufacturing date and can be

manually adjusted.

Summary of Contents for HiPath 1100


















































































































































































































































Search results

Summary of Contents for HiPath 1100

Reviews:

Related manuals for HiPath 1100

Brands by name

Popular brands

Siemens HiPath 1100, Programming Manual

Search results

Summary of Contents for HiPath 1100

Reviews:

Related manuals for HiPath 1100

Brands by name

Popular brands