Siemens HiPath 1100 Programming Manual Download Page 41

Page: 41 / 241

External line settings

Step by step

The user can use any line or group of external lines to

dial the number 262XXXX, but the system will dial the

number 341XXXX using the 890 group of external lines.

If the lines of this group are busy, the overflow option

will use the 891 group of external lines. It is possible to

insert pauses into the conversion rules (Consult the Hi-

Path 1100 Manager help file).

External line settings

Groups of external lines

Programming allows access to an external line or group

of external lines through a code other than "0."

Required:

Programming mode must be activated (*95

31994).

eij

Enter the programming code.

lmd

lmm

Enter the group code number (default is 0).

Enter a number for an external line (e.g., 801).

Press this key.

Initial status for programming mode.

Index Number

Select-
ed

Alterna-
tive
number

Group of
external
alterna-
tive lines

Group of
external
overflow
lines

267

342

890

262

341

890

891

You must program the conversion rules using the

HiPath 1100 Manager.

ACS does not affect emergency numbers when

the user dials directly.

Summary of Contents for HiPath 1100


















































































































































































































































Search results

Summary of Contents for HiPath 1100

Reviews:

Related manuals for HiPath 1100

Brands by name

Popular brands

Siemens HiPath 1100, Programming Manual

Search results

Summary of Contents for HiPath 1100

Reviews:

Related manuals for HiPath 1100

Brands by name

Popular brands