Siemens HiPath 1100, Programming Manual

Page: 28 / 241

Step by step
Important settings
28
e
or
f
or
g
w
Enter the denied list number you want to delete.
de
...
gi
w
Enter the list entry of the number to be denied access.
p
Enter the number that will be denied access (up to 16
digits).
Warning: Enter the number without the external access
code.
Wait 5 seconds
w
Wait for a confirmation tone.
Initial status for programming mode.
Deleting numbers from the denied list
Required:
Programming mode must be activated (*95
31994).
efg
w
Enter the programming code.
e
or
f
or
g
w
Enter the Denied List number you want to delete.
de
...
gi
w
Enter the list entry number of the number to be delet-
ed.
Wait 5 seconds
If no new number is entered after 5 seconds, the con-
tent of that entry is removed.
w
Initial status for programming mode.
Permission list
There are three permission lists that can be configured
with different telephone numbers and individual exten-
sion prefix combinations (enter the number without the
external access code).
• Permission list 1 (COS 4) with 10 entries
• Permission list 2 (COS 5) with 25 entries
• Permission list 3 (COS 6) with 25 entries
In addition to speed-dial numbers, the telephones con-
figured for outward-restricted trunk access (with per-
mission list) can only dial numbers that start with these
combinations. When any other number is dialed, the
phone answers with a busy signal.
The permission list already contains some combina-
tions. These can be deleted if so desired.
To change a locked number, simply enter its list
entry number and the new number.