Siemens HiPath 1100 Programming Manual Download Page 83

Page: 83 / 241

Programming an extension

Step by step

= Disable (default)

Initial status for programming mode.

External MWI group

The extensions configured for this group receive a Mes-

sage Waiting Indicator (MWI) signal from the external

voice mail server.

By default, no extension is configured.

Required:

Programming mode must be activated (*95

31994).

dei

Enter the programming code.

. p

Enter the extension numbers (e.g., 11/101) to be includ-

ed in the external MWI group.

Press this key to finalize the entry.

Initial status for programming mode.

Press this key to delete the extensions in the group.

Press this key to finalize the entry.

Initial status for programming mode.

Waiting Message Server Number

This setting specifies an MSN number for the Waiting

Message server.

By default, no MSN is configured.

Required:

Programming mode must be activated (*95

31994).

dji

Enter the programming code.

The group must be activated to use this feature

(code 014).

The Message Waiting Indicator is signaled by

means of a LED key on system telephones and

by a distinctive audible tone on standard tele-

phones. In the case of a standard telephone ac-

tivated for CLIP FSK with MWI service the signal

can be configured to show an icon on the display

or some other type of indication.

Summary of Contents for HiPath 1100


















































































































































































































































Search results

Summary of Contents for HiPath 1100

Reviews:

Related manuals for HiPath 1100

Brands by name

Popular brands

Siemens HiPath 1100, Programming Manual

Search results

Summary of Contents for HiPath 1100

Reviews:

Related manuals for HiPath 1100

Brands by name

Popular brands