Siemens HiPath 1100 Programming Manual Download Page 187

Page: 187 / 241

HiPath 1100 Manager

187

Step by step

•

Offline programming mode:

allows you to view,

edit and store a HiPath 1100 database on a PC that

is not currently connected to the PABX and later

transfer it to it.

You can also update the HiPath 1100 software using the

HiPath 1100 Software Update then store the database

with the system’s settings.

Read the HiPath 1100 Manager Help file before pro-

ceeding with this operation.

If the database has previously been saved in an

earlier version (HiPath 1100 V5.1, 5.2 or V6.0) and

you want to update the database to HiPath 1100

V7.0, all you need to do is restore the *.bup file

and the system will perform an automatic up-

date. Once the restore process is completed, a

popup message appears informing the user of

the changes resulting from the restore process.

Summary of Contents for HiPath 1100


















































































































































































































































Search results

Summary of Contents for HiPath 1100

Reviews:

Related manuals for HiPath 1100

Brands by name

Popular brands

Siemens HiPath 1100, Programming Manual

Search results

Summary of Contents for HiPath 1100

Reviews:

Related manuals for HiPath 1100

Brands by name

Popular brands