Siemens ET 200M, Manual, Page: 46 / 284

8-Channel Analog Input MTA
Marshalled Termination Assemblies for ET200M Remote I/O Modules
46 A5E00482820-12
4.10.2 Inputs
Select appropriate module hardware configuration settings.
Select
Measuring Type and Measuring Range settings to match the input signal
connected to the channel inputs.
Measurement of signals less than 0 volts or 0 mA requires that the channel
isolation jumper be cut.
Figure 4–5 shows the all the diagnostic boxes checked.
Figure 4–5 8-Channel Analog Input Hardware Configuration: Inputs Setup
Note
• Use the AI8 MTA I – V jumpers to select voltage or current input signals.
• Configure the AI8 module to match the input signal type.
• See Figure 4–1, Item 10, for the location of the I - V Jumper.