Siemens CP-8000 User Manual Download Page 332

Page: 332 / 614

Engineering via SICAM WEB

332

Unrestricted

SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual

DC8-037-2.02, Edition 10.2017

9.1.4.2 Protocol Elements

You can equip up to 4 protocol elements. The hardware for a protocol element is integrated on
the Master Module.

The selection of the protocol elements resides in the directory tree also under

SICAM A8000 CP-80xx | Master module

•

In order to configure a protocol element, select a protocol for the respective protocol ele-

ment number.

After selection of the protocol(s) and acceptance with a restart of the target device is re-
quired.

After the startup the configured protocol elements appear in the directory tree under

SICAM A8000 CP-80xx | Master module | PRE

<0…3>

<protocol name>

The parameterization takes place for each protocol in the

settings

page. The parameters of

newly identified protocols are assigned with their default values.

You find more detailed information on the protocols in the manual

SICAM RTUs

Ax 1703

Common Functions Protocol Elements

Summary of Contents for CP-8000







































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CP-8000

Reviews:

Related manuals for CP-8000

Brands by name

Popular brands

Siemens CP-8000, User Manual

Search results

Summary of Contents for CP-8000

Reviews:

Related manuals for CP-8000

Brands by name

Popular brands