Siemens CP-8000 User Manual Download Page 183

Page: 183 / 614

Installation and Circuitry

SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual

Unrestricted

183

DC8-037-2.02, Edition 10.2017

6.4.5

Coupling of External SICAM TM I/O Modules

CP-8000 can be expanded with up to 6 external SICAM TM I/O Modules. Thereto the follow-
ing steps are essential:

•

Mounting of the coupling module for SICAM TM I/O Modules

•

Mounting of the bus connector for SICAM TM I/O Modules

•

Mounting of the SICAM TM I/O Modules

6.4.5.1 Mounting of the Coupling Module for SICAM TM I/O Modules

The coupling module (CM-6811) must be mounted on the right side of the CP-8000 housing.

To mount the coupling module it is necessary to remove the label

which covers the I/O bus.

Afterwards lead the coupling module parallel to the housing

and push it evenly on it until it

is engaged.

The mount of the coupling module at the housing can take place before or after the device is
mounted on the DIN rail (see

Mounting of the Master Module

Now you can mount CP-8000 on the DIN rail.

Note

The mounting of the coupling module can take place before or after the housing is mounted on the DIN rail
(see

Mounting of the Master Module

SICAM CMIC

F 4

F 3

F 2

F 1

POK
RY

E TH

LK 1

PK 1

RS-232

OH 2
RTX2

RS-485

OH 3

RTX3

E TH

LK 4

PK 4

X 4

SICAM A8000

CP-8000

Summary of Contents for CP-8000







































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CP-8000

Reviews:

Related manuals for CP-8000

Brands by name

Popular brands

Siemens CP-8000, User Manual

Search results

Summary of Contents for CP-8000

Reviews:

Related manuals for CP-8000

Brands by name

Popular brands