Siemens ADVIA 2400, Operator'S Manual, Page: 83 / 200

Operating the System 83
The left side of the Test Result Monitor window displays three panels.
•
The System Status panel shows the current operating mode of the system.
•
The Sample information panel shows the sample number and sample position of the
currently selected position on the STT/CTT graphic. If this is a barcode analysis, the
barcode number displays, and the position number is 0-00.
•
The code panel shows the color codes used in the STT/CTT graphic to represent
sample status.
In the middle of the sample tray display, the tray (TT) number for the current run displays
in the TT No. list box. If this is a barcode analysis, the TT number is 0.
To view the status of prior tray samples that are still in process, select the down arrow of
the TT No. list box, then select the number of the tray you want to view.
Monitoring samples loaded on the optional universal rack handler
1. At the universal rack handler Operation Panel window, select
View
on the menu bar,
then select
Rack Handler Operation Monitor
or press
F8
.
Perform any of the following tasks at the Rack Handler Operation Monitor window:
a. follow the progress of each rack through the rack handler
b. locate racks that contain sample tubes with non-read labels
c. find a specific rack or tube currently on the rack handler
d. skip un-sampled racks
e. clear rack ID numbers where non-read ID samples occurs
f. edit non-read tube IDs
Perform the following tasks at the universal rack handler:
a. enter a sample ID for non-read labels at the Edit Non-Read Tube ID window
b. obtain a summary of the current rack handler activity at the Data Monitor
window
c. view and print all the racks/samples processed by the rack handler on a day-by-
day basis at the Review Data window
2. Use the Review/Edit window on the ADVIA software to determine when results are
available.