manualshive.com logo in svg

Siemens ADVIA 2400, Operator'S Manual, Page: 174 / 200

Share
Download
Siemens ADVIA 2400 Operator'S Manual Download Page 174

174 

 

ADVIA 2400 Operator’s Guide

 

8 System Setup 

Calibrating the touch screen monitor 

Use this procedure to calibrate the touch screen at your workstation. 

Calibrating the touch screen 

1.

 

Right-select the 

touch-screen

 icon at the bottom right of the screen. 

2.

 

Select 

Align

. 

3.

 

Select the targets that display at the screen. 

4.

 

Select the check mark. 

5.

 

The touch screen is calibrated. 

Configuring serum indices 

Use the following procedure to obtain the same flagging levels used by 
Siemens when evaluating method serum interferences 

•

 

Use the Qualit. set button in the Analytical Parameters (Serum) window to set the 
five different flagging levels for each serum index. 

•

 

Use the Item (Test) and Factor boxes in the Analytical Parameters (Serum) window 
to designate the test for the determination of serum indices.  

•

 

Use the Serum indices area on the System Specifications Set window to determine 
when the serum blank assay is run. 

Refer to the 

System Configuration

 section of the online 

Operator’s Guide

 for further 

information. 

Connecting to your host computer 

1.

 

Have your laboratory computer professional connect the host computer as described 
in the publication titled 

LIS Interface Guide

. 

2.

 

Use the Online Settings window to enter the communication parameters. 
Use the Online settings window to determine which sample results and workorders to 
transmit. 
 
This feature allows you to transmit results when they are available. This is called 
“real-time transmission.” 
 
If you do not want to use real-time transmission, you can always transmit the results 
as a batch using the Review/Edit window. 

Summary of Contents for ADVIA 2400









































































































































































































Reviews:

No comments