Siemens ADVIA 2400, Operator'S Manual, Page: 49 / 200

System Overview 49
Error Report window*
Use the Error Report window to review system status and error messages. If the column
has a drop-down arrow you can sort the column. You can also search by Samp ID, Safe
No, and Test Name.
For each message, the following information displays:
Icon
Samp.ID Safe. No.
No. Test Name Contents
Date Time Measures
Section FNO
Mode INDEX
NOTE:
While the Error Report window is displayed, it is not updated. To view new
messages, you must close the window, and then reopen it.
Reagent windows
Select the
Reagent
button to display the following Reagent menu:
Reagent Inventory window
Use this window to monitor the reagents in the reagent trays (RTT1 and RTT2). The
Reagent Inventory window displays the status of all reagents loaded on the reagent trays.
The window continuously refreshes with new information, and it updates after each
barcode scan.
The Reagent Inventory window automatically opens at start up and remains opened.
When using other windows or when you select the X in the upper right corner, the
window minimizes to the taskbar at the bottom.
The reagents listed in the window are in alphabetical order.
Perform any of the following tasks at this window:
•
monitor reagent positions, number of tests, volumes, and days remaining.
•
execute a barcode scan
•
deselect a reagent
•
print a reagent summary report
•
view the Total Test summary
•
view the calibration interval review
•
pre-calibrate a new reagent lot
CTT Monitor window
Use this window to monitor the amount of liquid in containers on the CTT tray.
Reagent Container Settings window
Use this window to enter and display information for non-barcoded reagent containers
and start their Days Remaining counter. This window is updated automatically for
barcoded reagents.