manualshive.com logo in svg

Siemens ADVIA 2400, Operator'S Manual, Page: 27 / 200

Share
Download
Siemens ADVIA 2400 Operator'S Manual Download Page 27

System Overview 

27 

Spectrophotometer 

 

 

1) 

Photometer 

2) 

Halogen Lamp 

3) 

Cooling Tank 

Figure 1-19. Location of the Spectrophotometer 

The spectrophotometer measures the amount of light absorbed at 14 specific wavelengths 
by liquids contained in reaction cuvettes. 

Every six seconds, the reaction tray (RRV) moves cuvettes containing reaction liquid 
(sample and reagent) in front of a halogen lamp, which sends light through the cuvettes. 
Each time, a different wavelength is measured. 

The photometer then measures the absorbance based on the lamp energy and the optical 
density of the cuvettes. This process is repeated for as many times and wavelengths as 
required by the assay conditions. 

A cooling tank maintains the lamp temperature. 

The system monitors the output energy of the halogen lamp during the cell blank check 
and after each assay. The operator is alerted if the lamp performance is abnormal. 

Use the Lamp Energy Monitor window to ensure that the halogen lamp is functioning 
normally. 

Reagents 

Reagent mechanisms 

The reagent probes (RPP1 and RPP2) aspirate reagent from the reagent trays (RTT1 and 
RTT2) and dispense it into reaction tray (RRV) cuvettes for analysis, according to 
specified conditions. Reagent pumps (RP1 and RP2) handle the aspiration and dispensing 
functions.  

Summary of Contents for ADVIA 2400









































































































































































































Reviews:

No comments