manualshive.com logo in svg

Siemens ADVIA 2400, Operator'S Manual, Page: 50 / 200

Share
Download
Siemens ADVIA 2400 Operator'S Manual Download Page 50

50 

 

ADVIA 2400 Operator’s Guide

 

This information is used by the Reagent Inventory window. 

Perform any of the following tasks at this window: 

•

 

set the reagent container type, lot number, and expiration date 

•

 

start the Days Remaining counter for non-barcoded reagent containers 

•

 

print the settings 

•

 

clear the settings 

Active Test List window* 

Use the Active Test List window to temporarily deactivate a method, so that method-
related alarm messages (for example, missing reagents) are not generated. You would use 
this function if, for example, for tests that you do not run every day.  

After you make your selections, activating or deactivating a method, you must initialize 
the system for the changes to take effect. 

The Active Test List window displays all tests loaded on the system, but the deactivated 
or unchecked tests are grayed out. 

NOTE: 

At the Active Test List window, you must select all the tests you expect to run. If 

a test is not selected, the system skips that test. An error message does 

not

 display in the 

Alarm message box on the Operation Panel, but is recorded in the error message log.

 

Active is checked if the test is active. 

Test Name displays the name and number of the test. 

R1 Pos No displays the position of R1 on the reagent tray. 

R2 Pos No displays the position of R2 on the reagent tray. 

Reagent Information window* 

Use this window to review and edit reagent information, such as on-system stability, 
calibration frequency, and fill volumes for barcoded reagents and to enter information for 
non-barcoded reagents. 

The Reagent Inventory and Reagent Container Set windows use this information. 

Assay Name

 is the test method name. 

R-Code

 is the reagent code for each Siemens barcoded reagent container or a 5 digit user 

defined code for non-barcoded reagents. 

Days Remaining

 

specifies the on-system reagent stability. 

Comment

 is a user entered remark or reminder. 

R1

 

and

 

R2

 

Fill

 

Volume

 are the fill volume in mL for reagent containers R1 and R2.  

NOTE: 

For user-defined methods, the Assay Name, R-code, Days Remaining and R1-

R2 Fill Volume must be entered correctly. R2e is not used.

 

After system installation, all default information for Siemens-defined methods appears in 
this window. 

Summary of Contents for ADVIA 2400









































































































































































































Reviews:

No comments