6- 27
Installation Conditions and Method
6
[3] Installing and connecting the IV-S30C2
(1) Connections
Up to two IV-S30C2 micro cameras can be connected to the IV-S20 main housing using the IV-
S20HC3 camera conversion cables.
1
Connect the camera cable(s) to the CAMERA 1 and CAMERA 2 connectors on the controller.
Note 1: Make sure to turn OFF the power before connecting or disconnecting the cameras.
- To connect them, match the keyed portion of the connectors and press in. When they are firmly
connected, you will hear a click.
- To unplug a connector, hold the plug housing and pull it straight out.
- Any camera plugged into the CAMERA 1 connector will be system camera 1 and any camera
plugged into the CAMERA 2 connector will be system camera 2 in the IV-S20 system.
Note 2: Make sure to connect a camera to CAMERA 1.
- The camera cable is 3 m long. If you need a longer cable, purchase the IV-S20EC2 camera
extension cable (2 m) or the IV-S20EC4 camera extension cable (4 m).
2
Plug the camera connector on the IV-S20HC3 camera conversion cable into the cable connector
on the IV-S30C2 camera and screw it down to secure the connection.
IV-S20HC3 camera
conversion cable
Camera 1
Camera 2
IV-S30C2
Micro camera
Camera 1 connector: CAMERA 1
Camera 2 connector: CAMERA 2
Plug
IV-S20 main housing
(side view)
Connector
1
3
2