9-92
Counting quantities by binary convension
9
Continued on the following page
Select item
6
MEAS.PROG.COND (conditions for measurement programs).
Select item
2
BINARY AREA COND (conditions for binary areas).
[TYPE00-MEAS1]
1
MEAS SELECTION
NO
CHECK-DEG-OF-MATCH
DST&AGL MES. (GRAY&EDGE GRAV
)
INSPECT-LEAD MEASR-BIN-AREA
CNT-BIN-OBJ LABEL-BIN-OBJ
POINT MEAS
2
COMPARE IMAGES
NO YES(CAM1)
3
SELECT CAMERA
CAM1
CAM2
4
COPY
EXEC
←
TYPE00
−
MEAS1
−
NO
5
INITIALIZATION
EXEC
6
MEAS.PROG. COND (TO NEXT SUB-MENU)
7
EVALUATION COND (TO NEXT SUB-MENU)
8
NUMERIC CALC COND (TO NEXT SUB-MENU)
9
OUTPUT CONDITIONS (TO NEXT SUB-MENU)
0
UPPER MENU
[MEASURING COND] (TYPE00-MEAS.1-CNT-BIN-OBJ)
1
REGST NO.
00(0~
3
) REG.NO
YES
2
BINARY AREA COND (TO NEXT SUB-MENU)
3
UPPER MENU
- In item
1
, select CNT-BIN-OBJ (measure the area of binary images).
- Item
2
will be displayed unless NO is selected in item
8
SELECT CAMERA
IMG (camera selection) which is in the [OBJECT TYPE COND] menu.
On the MAIN OPS MENU, move the cursor to SET-SCRN, and press SET key.
-
On the [SYSTEM SETUP] menu, move the cursor to
2
OBJECT TYPE COND (conditions of
object type) and press the SET key.
-
Select item
0
MEASUREMENT 1,
q
MEASUREMENT 2 or,
w
MEASUREMENT 3 on
the [OBJET TYPE COND] menu .
This is how the line looks
when the object type is set
to 00 and the selected
measurement is 1.
- If YES is specified in item
1
REGST NO. (registration number), then item
2
will be
displayed.
Measurement conditions
1
REGST NO.
(registration number)
2
BINARY AREA COND
(conditions for binary areas)
3
UPPER MENU
Setting details
Set this to any number from 0 to 3 and select NO or YES
to store it.
The conditions for binary areas are set on the next
menu.
This will return you to the [TYPE00-MEAS1 to 3] menu.
[2] Setting details
An explanation of
6
MEAS.PROG.COND (conditions for measurement programs) from the
[TYPE00-MEAS1 to 3] (object type measurement) menu.