9-104
Object identification (labeling) by binary conversion
9
Numerical
calculation
Setting details
1
CALC.RESULT
(calculation result)
See the recording and display the results from arithmetical operation for specified
data at any value from 00 to 15.
3
FORMULA
Selection of
2
The first line of the display
Total area [A]
,
number of objects [K] Registration 0 (0 to 3), N00 (0 to 15)
0A
to
3A/0K
to
3K
0R000
to
3R127, 0GX000 to
3GX127/0GY000
to
3GY127
0B000 to
3B127, 0FX000
to
0FX127/0FY000
to
0FY127
0CR000
to
3CR127
ABS/
√
/TAN/ATAN (00 to 15)
−
99999999.9
to
+
99999999.9
Continued from the previous page
[NUMERIC CALC] (TYPE00-MEAS.1-LABEL-BIN-OBJ)
1
CALC.RESULT
N00(0~15)
2
OBJECT TYPE
NO T-AREA[A] QTY[K] OBJ-AREA[R]
OBJ-GRAVTY[GX GY] OBJ-ANGLE[B]
OBJ-FILLET[FX FY] OBJ-PERIMETR[CR]
NUM-CALC[NC] CNST[C]
3
FORMULA
REG.0(0~3)
LABL000(0~127)
N00(0~15)
+ -
∗
/
← →
DEL. END
4
UPPER&LOWER LIMIT
+
00000000.0
〜
+
00000000.0
5
OUTPUT
NO
Y0(0~7) C000(0~107)
6
RUN A TEST
(SET KEY)
7
UPPER MENU
N00
N01
N02
N03
[R]
0R000
Y0
+00001950.0~ +00002050.0
+
00002000.0
OK
2
OBJECT TYPE (type) Select the type of data being calculated.
A number of formula settings are used.
The first line will change according to the selection made in item
2
.
Area by label [R]
Center of gravity by label [GX, GY]
Main axis angle of label [B]
Fillet width by label [FX, FY]
Circumference by label [CR]
Registration 0 (0 to 3), Label 000 (0 to 127),
N00 (0 to 15)
Numerical calculation [NC]
Constant [C]
ABS
√
TAN ATAN N00 (0 to 15)
(The second line is not be displayed.)
+00000000.0 (The second line is not be displayed.)
Note: Please use a smaller number for the number of formulas at N (00 to 15) than
that used for
1
CALC. RESULT N (00 to 15).
4
UPPER&LOWER LIMIT
5
OUTPUT
6
RUN A TEST
(make a test run)
7
UPPER MENU
Set the upper and lower limits for decisions.
Set the evaluation output for the results of the calculations.
Pressing the SET key will record the settings details as well as run a test.
Returns you to the [TYPE00-MEAS1 to 3] menu.
· The number of formulas which can be set are dictated by the selections made in items
②
and
③
as follows.
2
Type
Mathematical expression
Total area [A] / number of objects [K]
Area per label [R],
Center of gravity by label [GX]/[GY]
Main axis angle of each label [B],
Fillet width of each label [FX]/[FY]
Perimeter of each label [CR]
Numerical calculation [NC]
Constant [C]
The numbers ranging from 0 to 3 in front of the characters are registration numbers.
· For more information on numerical calculations see section 9-2 [4] Numerical calculations.
Note: You must run a test using item
6
RUN A TEST, before making any calculations.
Return to the [TYPE00-MEAS1 to 3] menu and select item
9
OUTPUT CONDITIONS.
Continued on the following page