9-103
Object identification (labeling) by binary conversion
9
Continued from the previous page
Continued on the following page
Return to the [TYPE00-MEAS1 to 3] (object type measurement) menu and select item
8
NUMERIC CALC COND
(numerical calculation conditions).
Select item
7
EVALUATION COND (evaluation condition) on the [TYPE00-MEAS1 to 3] menu.
These displays can be set using
the up and down keys. (The
choices are NO, Y0 to 7, C000 to
C127).
Evaluation conditions
Setting details
3
TOTAL AREA
(total surface area)
Set the range for the number of objects that will produce an
OK evaluation.
This will return you to the [TYPE00 to MEAS1 to 3] menu.
6
MAKE A TEST
RUN
7
UPPER MENU
Pressing the SET key will test the evaluation conditions, display
the test results.
4
LABEL NUM
5
OBJ-AREA
After performing a MAKE A TEST RUN at item
6
, and a label
number is entered, the results displayed in item
5
will change.
Enter the maximum label size (area) that will produce an OK
result.
· The center of gravity/main axis angle/fillet width/perimeter will
be displayed when measurement is set to YES on the
[MEASURING COND] menu.
· Items
2
to
6
will be displayed if REGST NO. (registration number) is set to YES on the
[MEASURING COND] (measurement conditions) menu.
After performing a MAKE A TEST
RUN at item
6
, the number of
objects identified will be displayed
in item
4
.
[EVALUATION COND]
(TYPE00-MEAS.1-LABEL-BIN-OBJ)
1
REGST NO.
0(0~3)
[TEST RESULT]
[OUT]
2
NUMBER
000~128
006
OK
NO
3
TOTAL AREA
000000~245760
008276
OK
NO
4
LABEL NUM
000(0~ 005 )
5
OBJ-AREA
000000~245760
001415
OK
NO
GRAVITY
(206.0,303.0)
AXIS-ANGL
-38.0
゜
FILLT-DIA
X=042 Y=030
PERIMETER
00138.8
6
MAKE A TEST RUN (SET KEY)
7
UPPER MENU
· Set the maximum number of objects/total area/area per label after checking the test results from
item
6
MAKE A TEST RUN.
· For more information about evaluation conditions, see section 9-2 [3] Evaluation conditions.
1
REGST NO.
(registration number)
Enter a number from 0 to 3.
2
NUMBER
(number of objects)
Set the range for the total area that will produce an OK
evaluation.