![background image](http://html1.mh-extra.com/html/flir/n347vw4-series/n347vw4-series_quick-start-manual_2306189001.webp)
flir.com/security/pro
6.3”
159mm
MODEL: N347VW4
SERIES
QUICK START GUIDE
English Version 2.0
FLIR Systems, Inc., Copyright © 2017
As our products are subject to continuous improvement, FLIR Systems
Inc. reserves the right to modify product design, specifications and
prices, without notice and without incurring any obligation. E&OE
flir.com/security/pro
VISIT
Compatible Accessories
IT’S ALL ON THE WEB!
FCC Notice
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
N347VW4_QSG_EN_R2
This security camera has several mounting options:
Safety Precautions
• Use an appropriate low-voltage power cable to prevent fire
or electrical shock.
• Make sure to install the camera in an area that can support
the camera weight.
• There are no user-serviceable parts inside the camera. Do
not disassemble the camera.
• Do not clean the lens cover with an abrasive cleaning
material. Use a soft cloth to clean the lens cover.
• Camera is rated for outdoor use (IP66), but is not intended
for submersion in water.
• Extend the Ethernet-cable run for your camera up to
300ft. You can use an RJ45 coupler or network switch to
connect male ends of Ethernet cable together. A maximum
of 3 connections is recommended.
Weights & Dimensions
4.7”
118mm
2.0lbs / 0.9kg
Weight
Accessories
Model Numbers
Junction Box
S4JF6G*
Wall Mount
S6WF1G
Pendant Cap
S6PCF1G
Pole Mounts
S4PA2G
with
S6WF1G,
or
S1PA2G
with
S6CF1G
Corner Mounts
S1RA2G
with
S6WF1G
Ceiling Mount
S6CF1G
4MP Motorized Varifocal
Network Vandal Dome Camera
Adjusting Zoom and Focus
1
2
Adjust the camera’s zoom and focus using an NVR or the web
interface. For more information, see your NVR’s instruction
manual on
www.flir.com/security/pro
.
NVR:
Right-click on the camera’s live view and then
click
AutoFocus
. Use the sliders to adjust the zoom and
focus.
Web Interface:
Use the controls in the right-hand panel
to adjust the zoom and focus.
3
Manual Zoom In/Out:
Located on the camera base, press
W
to zoom out and
T
to zoom in.
*Required for conduit installation.
6.3” / 159mm