Servomex 07931001B, Operator'S Manual

Page: 35 / 221

07931001B revision 6 © Servomex Group Limited. 2020
21
3.3 Start-up screen
The start-up screen is displayed when you first switch on the unit as it carries out a
self-test. The start-up screen shows the progress of the self-test and also displays
the main analyzer software release and transducer software release codes.
Figure 3-2: Start up screen
3.4 Measurement screen
When initialization
is complete the display will default to the ‘live’ measurement
screen. The measurement screen displays 2 measurements.
Figure 3-3
: Example of a ‘live’ measurement screen
Item
1
Measurement number
6
Soft key navigation icons
2
Measurement designation
7
System status icon
3
Measurement units
8
Measurement status icons
4
Live measurement reading
9
Software health indicator
5
Live transmission reading
Note: The lower half of the display can be configured to display values other than
transmission, e.g. a second measurement or pressure or temperature. In this
case, transmission will move to the system panel on the upper left section of the
screen.
Software
version