Servomex 07931001B, Operator'S Manual

Page: 40 / 221

26
© Servomex Group Limited. 2020 07931001B revision 6
3.8 Menu structure
Figure 3-6: Top level menu structure
Level 2
Calibrate
Setting To set calibration values and limits
Calibrate Calibrate the analyser
View History View calibration history
Export History Export calibration history
Live measurement
Clear History Clear calibration history
screen
Save Current Config Save calibration data
Restore Config Restore calibration data
Delete Config Delete calibration data
Data Log
Basic Log Log the concentration data
Detailed Tx Log Log all important parameters
Alarms
Active View active measurement alarms
Set Up Set up measurement alarms
Follow Select measurement alarms to follow
Level 1
History View alarm history
Menu
Calibrate
Status
Data Log Status View current analyser status
Alarms View History View analyser status history
Status Export History Export analyser status history
Set Up Clear History Clear analyser status history
Measurements
Service
Set Up
Manage Analyser Configure analyser to suit installation environment
mA Input Set mA input parameters
mA Output Set mA output parameters
Relay Setup Set relay parameters
Filtering Set filtering parameters
Unit Select Set gas measurement units
X-Interference Enter cross compensation value
Clipping Set clipping levels for measurements
User Settings Set clock, language, display and security settings
Measurement
Gas Sensor View detailed internal laser measurement data
mA Input View enabled mA input details
Control Unit Power View input power supply details
Graphs View graph measurement
Service
mA Output Override / calibrate analogue output
mA Input Enable calibration of analogue input
Relay Override Override relay state
Calibrate
shortcut
Alarms
shortcut