Servomex 07931001B, Operator'S Manual

Page: 49 / 221

07931001B revision 6 © Servomex Group Limited. 2020
35
Analyzer configuration (User settings) Saving/ loading
This information tells the unit “What product am I?”
,
“What facilities are enabled?”
and also stores user settings (alarm levels, mA output config, Network etc.). It does
not include the parameters of values related to the factory tuning of the analyzer
hardware.
The Configuration can be managed through the
“User setting” menu
Figure 3-12: Save/ load Analyzer (non-sensor) configuration menu
Note: This file can be saved / restored only to / from MicroSD card by Supervisor level
user.
Note: It is advisable to leave a backup copy on an SD Card present in the Instrument.
Menu Set Up User Settings
Calibrate Manage Analyser Network Settings
Data Log mA Input Password
Alarms mA Output Clock
Status Relay Setup Regional
Set Up Filtering Display Setup
Measurements Unit Select Backlight
Service X-Interference Brightness
Clipping Save Current Config
User Settings Restore Config
Delete Config
Save Support Package
Media
Information