Servomex 07931001B, Operator'S Manual

Page: 58 / 221

44
© Servomex Group Limited. 2020 07931001B revision 6
•
Option board software (if fitted)
•
Bootloader software
•
Transmitter software
•
Receiver software
4.2 Configure mA inputs
mA inputs are provided to allow the analyzer to make measurement corrections
when there are external influences in the process such as sample gas temperature
and pressure.
The analyzer
can be supplied with an ‘Options PCB’ that provides two mA inputs for
peripheral measurement devices.
The mA input provides a constantly updated input to the analyzer, in which the
current represents the value being measured by the peripheral device.
To select either mA input 1 or 2
Figure 4-7: Select mA input
To enable or disable the selected mA input
Figure 4-8: Enable or disable mA input
Once the mA input has been enabled it will need to be configured. The mA input
parameters that must be set up are illustrated in Figure 4-9: mA input sequential
menu.
The selected input is displayed
Menu Set Up mA Input 1 mA Input 1
in the screen header
Calibrate Manage Analyser Enabled Enabled
Data Log mA Input 2 (Disabled)
Alarms mA Output 1 (Disabled) 1 (Disabled)
Status Relay Setup
Set Up Filtering
Measurements Unit Select
Service X-Interference
Clipping
User Settings
select mA input
Menu Set Up mA Input 1 mA Input 1 mA Input 1
Calibrate Manage Analyser mA Input Enabled Enabled
Data Log mA Input Disabled
Alarms mA Output 1 (Disabled) Enabled Enabled
Status Relay Setup
Set Up Filtering
Measurements Unit Select
Service X-Interference
Clipping
User Settings
Enable or Disable
the mA input