Servomex 07931001B, Operator'S Manual

Page: 90 / 221

76
© Servomex Group Limited. 2020 07931001B revision 6
Example Data log:
Servomex 07931B1/000051 ; O2 LT ; Trans ; Temperature ; Pressure
1.7 ; 24/04/15 ; 11:50:07 ; O2 LT ; 20.76 ; % ; ; ; Trans ; 101.08 ; % ;
; ; Temperature ; 0.00 ; degC ; ; ; Pressure ; 0.00 ; bar ; ;
1.8 ; 24/04/15 ; 11:50:08 ; O2 LT ; 20.76 ; % ; ; ; Trans ; 101.08 ; % ;
; ; Temperature ; 0.00 ; degC ; ; ; Pressure ; 0.00 ; bar ; ;
1.9 ; 24/04/15 ; 11:50:09 ; O2 LT ; 20.76 ; % ; ; ; Trans ; 101.08 ; % ;
; ; Temperature ; 0.00 ; degC ; ; ; Pressure ; 0.00 ; bar ; ;
Detailed data log
The Detailed data log function enables the transducer communications for a given
time period to be recorded and stored. The log can be exported to internal memory
or SD card and used to examine detailed transducer communications.
It contains information about all the derived quantities that contribute to the gas
measurement (line width, amplitude, gas reference signal etc.) as well as the full
spectra and all analyzer communications.
Note: The detailed log is not enabled by default
Note: The detailed log is not interval based - it is real-time; therefore, data sets can
get very large and therefore overwrite option is best
Note: If logging cannot start or continue due to a MicroSD card issue a
Maintenance Required status, Data Logging error will be raised.
Log run mode
The log can be set to run or stop.
When in ‘run’, data is being logged by the unit.
Operator password is required to change status.
Note:
When in “Run” mode it is not possible to view, clear, export or change the
log media.
Log intervals
The log interval sets the rate at which the data is logged.