Servomex 07931001B, Operator'S Manual

Page: 144 / 221

130
© Servomex Group Limited. 2020 07931001B revision 6
Figure 7-6: Receiver unit mounting arrangement (example shown with fixed mount)
1
Analyzer mounting flange
2
Fixed mount flange
3
Process flange
4
Process flange reinforcement plate
5
Process wall
Receiver Unit = 1.6 kg (3.5 lb.)
Flange = 2.5 kg (5.5 lb.)
Unsupported cable weight = 2.0 kg (4.4 lb.)
Total = 6.1 kg (13.4 lb.)
As the TU weighs considerably more than the RU, support for the RU is less of an
issue. However, you should use a similar mounting arrangement for consistency.
Note: An alternative to the reinforcement plate is to provide ceiling or floor supports to
hold the weight of the TU or RU, although these may impact on the ease of
alignment and adjustments.