Servomex 07931001B, Operator'S Manual

Page: 75 / 221

07931001B revision 6 © Servomex Group Limited. 2020
61
To select relay 1, 2 or 3
Figure 4-23: Relay output selection menu
Once the relay has been selected it will need to be configured.
Figure 4-24: Relay output configuration menu
Relay event options
The relay event options that you can set are illustrated in the menu table below, also
reference section 4.5
Menu Set Up Relay Setup Relay Setup
Calibrate
Manage Analyser
Relay Relay 3
Data Log mA Input 1
Alarms mA Output 1 2
Status Relay Setup
Set Up Filtering
Measurements Unit Select
Service X-Interference
Clipping
User Settings
Select relays 1,2 or 3
Menu Set Up Relay Setup Relay Setup Relay 1 Event 1
Calibrate
Manage Analyser
Relay Relay 1 Event 1 None
Data Log mA Input System Fault
Alarms mA Output 1 None System Maint.
Status Relay Setup System S.I.P
Set Up Filtering System O. o. S.
Measurements Unit Select 1 XXX Fault
Service X-Interference
1 XXX Maint
Clipping
1 XXX S.I.P
User Settings
1 XXX O.o.S
2 Trans Fault
2 Trans Maint
2 Trans S.I.P
2 Trans O.o.S
3 XXX Fault
3 XXX Maint
3 XXX S.I.P
3 XXX O.o.S
4 Temperature Fault
4 Temperature Maint
4 Temperature S.I.P
4 Temperature O.o.S
5 Pressure Fault
5 Pressure Maint
5 Pressure S.I.P
5 Pressure O.o.S
mA Out 1 Range
mA Out 2 Range
Low Alarm
High Alarm
Alarm 1
Alarm 25
select option
S.I.P = Service in Progress
O. o. S. = Out of Specification
Maint = Maintenance required