Servomex 07931001B, Operator'S Manual

Page: 93 / 221

07931001B revision 6 © Servomex Group Limited. 2020
79
Figure 5-5: Micro SD connector
Note: The Laser 3 Plus will support memory cards with capacity between 128Mb to
32Gb.
Note: The Analyzer software will use up to a maximum of 2Gb of storage memory for a
single file. Large datalogs (> 200000 records) can take extended periods of time
(> 10 minutes) to export to the micro SD Card The largest number of log records
that can be stored on 2Gb SD Card is 775507 records taking approximately 30
minutes to export.
Note: MicroSD Card speeds do vary and can have a significant effect on export
timings.
Note: Unformatted Micro SD cards are not supported by the analyzer. MicroSD cards
should be formatted as
FAT32 format prior to insertion. If an unformatted card is
inserted an error would be given only when a user attempt to use the card by
turning logging on or saving settings.
Note: When inserting or removing the SD card take care not to remove the metal card
holder as, when open, the holder can slide backwards and out. And be
disconnected from the PCB.