Servomex 07931001B, Operator'S Manual

Page: 65 / 221

07931001B revision 6 © Servomex Group Limited. 2020
51
The mA output parameters that you must set up are illustrated in the
sequential menu table below:
Figure 4-11: mA output sequential menu
Figure 4-12: mA output selection menu
mA Output
Level 3 Level 4 Level 5 Level 6 Level 7 Level 8
1
2
Range Auto
Set up Range 1 back to set up
Range 2
1 (Free)
2 (Free)
1.-
2. Trans
3.-
4.-temperature
5.-pressure
Follow
Freeze
None
High
Low
0-20 mA
4-20 mA
mA Output (1 or 2) select option
Range
mA Output
select option
Measurement 1 select option
Range
mA Output
Range 1 Low Level 0.000 edit value
Range 1 High Level 0.000 edit value
Range 2 Low Level 0.000 edit value
Range 2 High Level 0.000 edit value
4.000 mA edit value
During Calibration select option
Jam Condition select option
0.000 view value
0.000
extra measurement
Setup
Measurement 2
Measurement
mA Output view value
mA Output Range select option
Underrange
The selected output is displayed
Menu Set Up mA Output mA Output 1:XXX mA Output 1:XXX
in the screen header
Calibrate Manage Analyser Range mA Output mA Output
Data Log mA Input Set Up 2 (Free)
Alarms mA Output 1 (Free) 1 (Free)
Status Relay Setup
Set Up Filtering
Measurements Unit Select
Service X-Interference
Clipping
User Settings
select mA input