SELVA MARINE Fin Whale 225 EFI, Service Manual

Page: 39 / 399

6AL3J11
2-8
1
2
3
4
5
6
7
8
9
Electrical
Propeller shaft
Propeller shaft free play mm (in) 0.20 – 0.50
(0.0079 –
0.0197)
0.25 – 0.35
(0.0098 –
0.0138)
0.20 – 0.50
(0.0079 –
0.0197)
0.25 – 0.35
(0.0098 –
0.0138)
Propeller shaft shims mm 1.80, 1.90,
2.00, 2.10,
2.20
0.10, 0.12,
0.15, 0.18,
0.30, 0.40,
0.50
1.80, 1.90,
2.00, 2.10,
2.20
0.10, 0.12,
0.15, 0.18,
0.30, 0.40,
0.50
Runout limit mm (in) 0.02 (0.0008)
Drive shaft
Runout limit mm (in) 0.2 (0.008)
Item Unit
Model
200 R 200 L 225 R 225 L
Ignition and ignition control
system
Spark plug gap mm (in) 1.0 – 1.1 (0.039 – 0.043)
Crank position sensor output
peak voltage
(W/B – B)
at cranking (unloaded) V 3.0
at cranking (loaded) V 2.7
at 1,500 r/min (loaded) V 14.5
at 3,500 r/min (loaded) V 17.8
Crank position sensor
resistance
(*1)
(W/R – B)
Ω
396 – 594
Crank position sensor air gap mm (in) 1.4 – 1.6 (0.055 – 0.063)
Knock sensor resistance k
Ω
504 – 616
Intake air temperature sensor
resistance
at 20 ° C (68 ° F) k
Ω
2.21 – 2.69
Engine temperature sensor
resistance
(B/Y – B/Y)
at 20 ° C (68 ° F) k
Ω
54.2 – 69.0
at 100 ° C (212 ° F) k
Ω
3.12 – 3.48
Thermoswitch ON temperature ° C ( ° F) 84 – 90 (183 – 194)
Thermoswitch OFF
temperature ° C ( ° F) 68 – 82 (154 – 180)
Shift cut switch resistance
at free position (L/Y – B) k
Ω
4.465 – 4.935
(*1)
The figures are for reference only.
Item Unit
Model
200 R 200 L 225 R 225 L
Maintenance specification