SELVA MARINE Fin Whale 225 EFI, Service Manual

Page: 37 / 399

6AL3J11
2-6
1
2
3
4
5
6
7
8
9
Fuel system
Crankcase
Crankshaft journal oil
clearance mm (in) 0.025 – 0.050 (0.0010 – 0.0020)
Upper crankcase main bearing
thickness
1 mm (in) 2.494 – 2.500 (0.0982 – 0.0984)
2 mm (in) 2.498 – 2.504 (0.0983 – 0.0986)
3 mm (in) 2.502 – 2.508 (0.0985 – 0.0987)
Lower crankcase main bearing
thickness
1 mm (in) 2.494 – 2.500 (0.0982 – 0.0984)
2 mm (in) 2.498 – 2.504 (0.0983 – 0.0986)
3 mm (in) 2.502 – 2.508 (0.0985 – 0.0987)
Lower crankcase main bearing
thickness (J3)
1 mm (in) 2.492 – 2.500 (0.0981 – 0.0984)
2 mm (in) 2.496 – 2.504 (0.0983 – 0.0986)
3 mm (in) 2.500 – 2.508 (0.0984 – 0.0987)
Thrust bearing thickness (J3) mm (in) 1.907 – 1.957 (0.0751 – 0.0770)
Thermostat
Opening temperature
at 0.05 mm (0.0020 in) ° C ( ° F) 58 – 62 (136 – 144)
Fully open temperature ° C ( ° F) 70 (158)
Valve open lower limit mm (in) 4.3 (0.17)
Item Unit
Model
200 R 200 L 225 R 225 L
Fuel system
Fuel pressure
at engine start switch to “ ON ”
Within 5 seconds
(*1)
kPa
(kgf/cm
2
, psi)
300 (3.0, 43.5)
at engine idle speed
(*1)
kPa
(kgf/cm
2
, psi)
260 (2.6, 37.7)
Canister holding pressure kPa
(kgf/cm
2
, psi)
19.6 (0.196, 2.8)
(*1)
The figures are for reference only.
Item Unit
Model
200 R 200 L 225 R 225 L
Maintenance specification