SELVA MARINE Fin Whale 225 EFI, Service Manual

Page: 358 / 399

ELEC
Electrical system
– +
8-47
6AL3J11
8. Remove the E-clip
D
, and then remove
the clutch assembly
E
from the pinion
shaft
F
.
NOTE:
Push the clutch assembly
E
completely
down onto the pinion shaft
F
in direction
a
,
rotate it 1 spline in direction
b
, and then
remove it in direction
c
.
Checking the starter motor
1. Check the commutator. Clean with 600 –
grit sandpaper and compressed air if
dirty.
2. Measure the commutator diameter.
Replace the armature if below specifica-
tion.
3. Measure the commutator undercut
a
.
Replace the armature if below specifica-
tion.
4. Check the armature for continuity.
Replace the armature if out of specifica-
tions.
S6AL8240
D
a
b
c
F
F
E
E
a
c
b
S6AL8250
E
F
Commutator standard diameter:
29.0 mm (1.14 in)
Wear limit: 28.0 mm (1.10 in)
Commutator standard undercut
a
:
0.8 mm (0.03 in)
Wear limit: 0.2 mm (0.01 in)