SELVA MARINE Fin Whale 225 EFI, Service Manual

Page: 345 / 399

6AL3J11
8-34
1
2
3
4
5
6
7
8
9
6. Check the wiring harness for continuity.
NOTE:
Depending on the outboard motor, the loca-
tion of the red/green terminals (79 and 80) of
the coupler
b
may be switched.
7. Connect the ECM coupler
b
and fuse
holder couplers
d
and
e
.
8. Disconnect the electronic throttle valve
coupler
c
.
9. Turn the engine start switch to “ ON, ” and
then measure the TPS input voltage at
the electronic throttle valve coupler
c
(wiring harness end).
10. Turn the engine start switch to “ OFF. ”
11. Connect the electronic throttle valve cou-
pler
c
.
Variable camshaft timing control
system
8
Checking the cam position sensor
1. Disconnect the cam position sensor cou-
plers.
Wiring harness continuity
Terminal No.
Color
Coupler
b
Coupler
d
,
e
79 10 R/G
80 11 R/G
66 27 Y
S6P28530
d
e
S6P28840
b
d e
TPS input voltage (reference data):
Terminal
5
(O) – Terminal
3
(B):
4.75 – 5.25 V
S6AL8592
5 3
c
c
ECM and electronic throttle valve control system / Variable camshaft timing control system