6AL3J11
9-20
1
2
3
4
5
6
7
8
9
Symptom 1: Engine will not start (engine cranks)
Symptom 2
Cause 1
Cause 2
Checking step
Refer
to
page
ECM does not
operate
Relay malfunction
—
Check the relay.
8-27
Blown fuse
—
Check the fuse.
8-5
Short, open, or
loose connection in
ECM circuit
—
Check the ECM cir-
cuit.
8-27
Engine start switch
malfunction
—
Check the engine
start switch.
8-25
Spark plug does not
spark (all cylinders)
Crank position sen-
sor malfunction and
cam position sensor
(PORT EX) mal-
function
—
Check the crank
position sensor and
cam position sen-
sor.
8-18
8-34
Short, open, or
loose connection in
ignition coil ground
circuit
—
Check the wiring
harness continuity.
WD
Fuel not supplied
(all cylinders)
High-pressure fuel
pump does not
operate
Short, open, or
loose connection in
high-pressure fuel
pump circuit
Check the wiring
harness continuity.
WD
Blown fuse
Check the fuse.
8-5
Relay malfunction
Check the relay.
8-39
High-pressure fuel
pump malfunction
Check the high-
pressure fuel pump
continuity.
8-39
Low-pressure fuel
pump does not
operate
Short, open, or
loose connection in
low-pressure fuel
pump circuit
Check the wiring
harness continuity.
WD
Blown fuse
Check the fuse.
8-5
Low-pressure fuel
pump malfunction
Check the low-pres-
sure fuel pump con-
tinuity.
8-39
Fuel not supplied to
the fuel rails
—
Measure the fuel
pressure.
4-6
Vapor shut-off valve
does not close
Fixed vapor shut-off
valve
—
Check the vapor
shut-off valve.
8-40
WD: See the wiring diagram.
Troubleshooting the power unit
Summary of Contents for Fin Whale 225 EFI
