SELVA MARINE Fin Whale 225 EFI, Service Manual

Page: 231 / 399

6AL3J11
6-46
1
2
3
4
5
6
7
8
9
Assembling the lower case
1. Install the needle bearing into the
retainer to the specified depth.
2. Install the original shim(s) and retainer
into the lower case.
NOTE:
• Be sure to select the reverse gear shim(s) if
replacing the thrust bearing, retainer or
lower case.
• To select the shims, see Chapter 6, “ Shim-
ming (counter rotation model). ”
• Make sure that the slots
b
in the retainer
are aligned vertically as shown.
3. Install the needle bearing into the lower
case.
NOTE:
• Apply gear oil to the needle bearing outer
case before installation.
• The needle bearing contains 24 rollers.
Assembling the reverse gear
1. Install a new needle bearing into the
reverse gear to the specified depth.
Needle bearing attachment
1
:
90890-06654
Driver rod L3
2
: 90890-06652
Depth
a
: 0
±
0.25 mm (0
±
0.01 in)
Ball bearing attachment
3
:
90890-06657
Driver rod LL
4
: 90890-06605
UP
b
b
4
S6AL6490
3
b b
G
Ball bearing attachment
5
:
90890-06655
Bearing outer race puller
assembly
6
:
90890-06523
Needle bearing attachment 1 :
90890-06653
Driver rod SS
2
: 90890-06604
Depth
a
:
7
±
0.25 mm (0.28
±
0.01 in)
S6AL6500
a
1
2
G
Drive shaft and lower case (counter rotation model)