SELVA MARINE Fin Whale 225 EFI, Service Manual

Page: 132 / 399

POWR
Power unit
5-31
6AL3J11
17. Install the timing belt onto the drive
sprocket with the arrow mark
e
facing
upward and align the timing belt mark
f
with the “ ” mark on the drive sprocket.
Ì
Belt teeth number
CAUTION:
• Do not twist, turn inside out, or bend the
timing belt beyond the maximum limit of
25 mm (1.0 in) otherwise it can be dam-
aged.
• Do not get oil or grease on the timing
belt.
18. Install the timing belt onto the driven
sprockets by aligning belt position marks
g
through
m
with the “ ” marks on the
driven sprockets.
19. Adjust the timing belt to the specified
installation height
n
.
20. Check that belt position marks
g
through
m
are aligned with each alignment mark
on the drive sprocket and driven sprock-
ets, and then remove the pin
9
.
S6AL5370
f
e
S6P25460E
160 133 88 60 0 1 2 3
m k h g f
e
Ì
Timing belt installation height
n
:
2.0 mm (0.08 in)
S6P25700E
m
g
k
h
S6P25710
n
S6AL5330
9