SELVA MARINE Fin Whale 225 EFI, Service Manual

Page: 225 / 399

6AL3J11
6-40
1
2
3
4
5
6
7
8
9
NOTE:
• Be sure to select the propeller shaft shim(s)
if replacing the propeller shaft, propeller
shaft housing, thrust bearing or taper roller
bearing.
• To select the shims, see Chapter 6, “ Shim-
ming (counter rotation model). ”
4. Install a new taper roller bearing
7
and
the bearing outer race
8
into the propel-
ler shaft housing using a press.
NOTE:
After installing the taper roller bearing and
bearing outer race, check that the propeller
shaft rotates smoothly.
5. Install the propeller shaft housing assem-
bly in the reverse direction into the lower
case.
NOTE:
To prevent damage to the parts when install-
ing the propeller shaft housing assembly in
the reverse direction, use flangeless bolts
0
(M8
×
30 mm) without washers.
6. Install the claw washer
A
and ring nut
B
, and then tighten the ring nut to the
specified torque.
Ring nut wrench
9
: 90890-06578
Ring nut wrench
9
: 90890-06578
T
R
.
.
Ring nut
B
:
108 N · m (10.8 kgf · m, 79.7 ft · lb)
S6AL6370
Propeller shaft housing (counter rotation model)