SELVA MARINE Fin Whale 225 EFI, Service Manual

Page: 189 / 399

6AL3J11
6-4
1
2
3
4
5
6
7
8
9
Removing the lower unit
1. Drain the gear oil.
2. Set the gear shift to the neutral position,
and place a block of wood between the
anti-cavitation plate and propeller to keep
the propeller from turning, and then
remove the propeller nut and propeller.
WARNING
• Do not hold the propeller with your
hands when loosening or tightening it.
• Be sure to disconnect the battery cables
from the battery and the clip from the
engine stop lanyard switch.
• Put a block of wood between the anti-
cavitation plate and propeller to keep
the propeller from turning.
• When removing the lower unit with the
power unit installed, be sure to suspend
the outboard motor. If the outboard
motor is not suspended it can fall sud-
denly and result in severe injury.
3. Mark the trim tab
1
at the area shown,
and then remove it.
4. Remove the bolts (nuts), and then
remove the lower unit from the upper
case.
È
U-transom model
Lower unit (regular rotation model)