Section 07 BODY AND HULL
Subsection 01 (SUSPENSION (iS))
smr2009-041-024_a
1. Lateral support screw
2. Decouple lateral support from suspension
shaft.
3. Using the
SUPERTITANIUM DRILL BIT 3/16"
(P/N 529 031 800)
, remove all rivets (12) secur-
ing the lateral bellows ring to body.
529031800
smr2009-041-025_a
1. Rivet location
4. Remove lateral ring.
5. Cut Oetiker clamp securing bellows to lateral
support.
6. Separate lateral support from bellows.
Lateral Bellows Installation
The installation is the reverse of the removal pro-
cedure. However, pay attention to the following.
Apply soapy water solution on bellows opening
and insert the lateral support.
Index suspension shaft with the lateral support.
The lateral support can be inserted in one position
only.
Install the retaining ring. Align the ring pin with
holes in bellows and body.
smr2009-041-026_a
1. Ring pin
2. Bellows alignment hole
3. Body hole
Install new rivets. If the head of rivet tool can-
not be inserted in ring opening, use the sleeve
(P/N 707 000 181) to offset the rivet tool and well
lean the rivet head against ring.
Index lateral supports with the front suspension
shaft ends. Lateral supports can be inserted in
one position only.
Tighten
lateral
support
screw
to
48 N•m
(35 lbf•ft).
Install a new Oetiker clamp. Position the ear of
clamp rearwards.
smr2009-041-066_a
RH SIDE SHOWN
1. Ear of clamp rearwards
FRONT SUSPENSION ARM
Front Suspension Arm Removal
1. Remove the moving deck. Refer to
BODY
sub-
section.
2. Remove the engine. Refer to
ENGINE RE-
MOVAL AND INSTALLATION
subsection.
3. Remove both lateral support screws.
smr2009-041
459
Summary of Contents for GTX Limited iS 255 2009
