Sea-doo GTX Limited iS 255 2009, Shop Manual

Page: 494 / 555

Section 07 BODY AND HULL
Subsection 02 (BODY)
smr2009-042-066_a
1. Hoist
2. Lifting strap
smr2009-042-023_a
1. Use this rivet as reference point
A. 340 mm (13-1/2 in)
NOTICE
Lifting the rear of moving deck more
than the recommended height can damaged
the steering cable.
Lowering Back Moving Deck
1. Carefully lower and secure the rear suspension
arm to the fixed deck.
1.1 Position the rear suspension arm brackets
in accordance with the reference marks
previously draw on fixed deck.
NOTICE
If no mark was trace, refer to IS
SUSPENSION subsection for proper pro-
cedure to install and align the rear suspen-
sion arm.
1.2 Install NEW screws to secure rear suspen-
sion arm brackets.
1.3 Tighten screws to 25 N•m (18 lbf•ft).
2. Detach lifting device.
3. Remove pieces of wood located under the front
of moving deck.
Removing the Moving Deck for
Servicing Watercraft
1. Open the front storage cover and remove the
front basket.
2. Remove the
BOARDING PLATFORM
, see pro-
cedure in this subsection.
ssi2009-002-002_a
1. Boarding platform
3. Remove bolts securing both rear suspension
arm covers.
smr2009-042-010_a
1. Cover screws
4. Mark position of rear suspension arm brackets
for proper reinstallation.
5. Remove and discard screws securing rear sus-
pension arm to fixed deck.
smr2009-042
471