Section 06 STEERING AND PROPULSION
Subsection 02 (iBR AND VTS)
smr2009-039-002_a
1. Bailer hoses
3. Loosen the gear clamp and disconnect the wa-
ter pressure hose from the jet pump.
smr2009-039-003_a
1. Water pressure hose
4. Remove the LH storage bin, refer to the
BODY
subsection.
5. Disconnect the four hoses connected to the fit-
ting plate mounted in the iBR support plate.
smr2009-043-006_a
TYPICAL
1. Bailer hoses (x2)
2. Intercooler bleed hose
3. Pump water pressure hose
6. Remove the
FITTING PLATE
from the support
plate as described in this subsection (
this step
is only applicable to models with a metal re-
tainer on the support plate
).
7. Remove and discard the 5 hexagonal screws
securing the outer support plate to the inner
support plate.
smr2009-043-011_a
TYPICAL - MODEL WITH PLASTIC RETAINING TABS
ILLUSTRATED
1. Hexagonal screws to remove
2. Outer support plate
8. From the iBR actuator side, carefully com-
press the outer support plate tab retaining the
two support plates together using a common
screwdriver.
smr2009-037
399
Summary of Contents for GTX Limited iS 255 2009
